Professional SPF roof installation, coating, and insulation in Mission, TX. Free inspections. Call today for a no-obligation estimate.
Full-spectrum spray foam solutions for residential and commercial buildings in Mission, TX.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
Stop metal roof leaks without replacement. Our elastomeric coating system treats rust, seals every fastener and seam, and creates a continuous waterproof membrane over your entire metal roof — backed by a manufacturer warranty.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Waterproof your flat or low-slope roof with a spray-applied membrane system that eliminates the seam failures, flashing leaks, and ponding damage that plague conventional roofing. One seamless application. Permanent results.
Preventive roof maintenance programs with scheduled inspections, drain cleaning, minor repairs, and detailed photo-documented condition reports. Catch small problems before they become expensive emergencies.
Expert repair for existing SPF roofs including blistering, coating deterioration, punctures, and storm damage. We restore your foam roof to like-new condition with matching materials and factory-specified application techniques.
Emergency storm damage response with tarping, property protection, detailed damage documentation for insurance, and complete roof restoration to pre-storm condition. We work directly with insurance adjusters.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Full roof replacement with spray polyurethane foam delivers superior insulation, waterproofing, and wind uplift resistance compared to conventional membrane systems. We strip the old roof, inspect the deck, and install a new SPF system built for decades.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
Transform your building with a spray foam roof that insulates, waterproofs, and strengthens in a single application. No tear-off required over most existing substrates. Backed by manufacturer warranties and our own workmanship guarantee.
Extend the life of your existing roof by 15 to 20 years with a silicone coating that seals every seam, reflects solar heat, and handles ponding water without softening or deteriorating. Professional application with manufacturer warranty.
In a city the size of Mission, TX, property owners and facility managers need a spray foam contractor who can handle any scale — from single-family attic insulation to multi-building commercial roof restorations. Lapolla Industries has been delivering that capability since 2003, backed by a legacy in SPF manufacturing that sets us apart from general roofing contractors.
Our Mission operations cover the full spectrum of spray foam services: new SPF roof installations, flat roof repair, silicone and elastomeric coatings, attic and crawl space insulation, and emergency storm damage response. Every crew is fully equipped, factory-trained, and committed to the precision that spray foam application demands.
Here is what sets Lapolla Industries apart from other contractors in Mission.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Every project comes backed by manufacturer material warranties plus our own workmanship guarantee. We handle all warranty registration so you are always covered.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
Unlike conventional roofing with seams, joints, and fasteners, spray foam creates a monolithic membrane with zero penetration points — eliminating the most common sources of roof leaks.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
Common questions about spray foam roofing and insulation in Mission, TX.
A properly installed SPF roof in Mission can last 30 to 50 years with periodic recoating every 10 to 15 years. The closed-cell foam itself does not degrade — only the protective topcoat needs maintenance. Many spray foam roofs installed in the 1970s are still performing today.
Spray foam is one of the best solutions for flat and low-slope roofs in Mission. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Spray foam insulation costs in Mission typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Mission homeowners see a full return on investment through energy savings within 3 to 5 years.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Mission crews evaluate the existing substrate to ensure it is structurally sound before application.
Silicone roof coatings offer the longest service life for flat and low-slope roofs in Mission. Unlike acrylic coatings, silicone does not re-emulsify in ponding water and maintains its flexibility and UV resistance for 15 to 20 years. We recommend silicone for any Mission roof with drainage challenges or heavy weather exposure.
Call us immediately for emergency tarping to prevent further water damage. Our Mission storm damage crews respond quickly to secure your property, document all damage with photos and measurements for your insurance claim, and provide a complete restoration plan. We work directly with insurance adjusters to ensure your claim is handled smoothly.
Our reputation is built on results. Here is what our customers say.
"Our old three-layer built-up roof was beyond saving. They stripped everything down to the deck, repaired the substrate, and installed a new spray foam roofing system. The building is better insulated now than it has ever been."
"Our 18-year-old roof was showing its age but still structurally sound. Lapolla Industries recommended restoration over replacement and it was the right call. New coating, sealed seams, and a 15-year warranty. Smart investment."
"Attic insulation upgrade from blown-in to spray foam. The crew masked everything off properly and the overspray was minimal. The temperature in our attic dropped dramatically and so did our energy bills. Worth the investment."
Lapolla Industries proudly serves property owners in these cities near Mission.